Indoor partition:
As the indoor non-loaded wall, the indoor partition (wall) system has been made in the past 10-120, and the European standardization organization and certification bodies have made efforts. Committed to developing a new set of European technical certification standards and guidelines. In this guide, it is pointed out that the indoor partition (wall) is described as the basic requirements of non-load separation, and is described below:
1, as the indoor partition wall of the non-loaded wall, its mechanical strength and stability It directly affects its safety during use.
1 .1 can withstand the force in the horizontal direction or in other directions
1.2 to prevent damage from the body contact
2. In the fire Safety
3. Health, health and environmental protection requires
3.1 Release formaldehyde, asbestos, pentachlorophenols and other harmful substances
3.2 waterproof steam Permeability
3.3 Waterproof Permeability
4. Prevent Noise
5. Energy Survey and Heat Keeping That is, the thermal insulation of indoor partition wall It is also a problem that needs to be considered.
6. The effect of the stability of the indoor partition wall caused by physical factors or chemical factors also needs to be considered.
The above corresponding technical requirements, European standardized organizations have established corresponding test methods. All test methods and standard summary, that is, the technical standards of European indoor non-supporting walls, namely: ETA (Europen Technical Approval).
Indoor partition: Compared to outdoor, it is usually due to most of the partitioning products that are contained in indoors.
Partition: Sound géduàn refers to an appliance or product that separates a structure (such as a house, room or fence). The space is in the room, called the indoor partition.
Laws and regulations
Xinhua News Agency Beijing September 18 (Liu Yizhan, Guo Xiuyan) Reporter was learned from the State Council Legal Office on the 18th that "Entertainment Plan Management Measures (Draft)" Officially announced. Summary of the opinion, singing and dancing and entertainment venues, private rooms must not be set to exhibit screens, separators, plates, etc., etc., and do not set up any form of room in any form of room (except for bathroom).
Submissions stipulates, the box of song and dance entertainment venues, bar tables in the private room, dining table and other items do not exceed 1.2 meters, the box, the door and windows between the room, 1.2 meters from the ground.
Submissions stipulate that the per capita occupancy area of singing and dancing entertainment venues shall not be less than 1.5 square meters; the area of use of the entertainment venues is not less than 200 square meters; the entertainment venue established in rural areas The minimum use area standard is made by the provincial people's government cultural authorities to consider regional differences.
Since the consequences of the opinion, the cultural competent authority shall be submitted to the area, location, surrounding environment, etc. of the placement, location, surrounding environment, etc. shall be subjected to field exploration. If the field exploration is qualified, the office of the establishment site and the cultural authority office site will be announced on the 10th, and the hearing shall be organized according to law.
Decision of the opinions, entertainment venues should hang "Entertainment Business License" in a prominent location, and the minor is banned or limited to the mark, indicating the "12318" cultural market report phone.
The relevant person in charge of the Legal Office of the State Council said that the management method comes to the publication of the opinion, aims to strengthen the management of entertainment venues and ensure the healthy development of entertainment venues. The comment is clearly defined for the establishment of the establishment site, settling conditions, and setup procedures, etc. of the entertainment venue. For the discussion of the opinions on the management measures, the public can feed back to the Ministry of Culture before October 17, 2012.
Indoor partition classification
: Indoor partition, including home partition, office partition, commercial partition, segregation, window break, etc., home partitions have screen partition, bead curtains, Cabinet partition, etc .; office partitions have high partitions, office low partitions; commercial segments have been used in supermarkets, shopping malls, exhibition halls, etc.
The indoor partition is an important component of the split space and is a non-loaded wall.
The type of indoor partition can be divided into block-type separation, stand-shaped partition wall, plate-like wall partition wall, etc.,
1, block Indoor partitions
in the room with ordinary clay bricks, hollow bricks, aerated concrete blocks, glass bricks and other blocks of non-loaded walls.
< B> Second, the standing chamber section is composed of the lightweight partition wall composed of the skeleton and the finishing layer. There is a plate plaster partition wall, steel mesh plaster segregation wall, each Substrate partition wall, etc., commonly used with light steel keel, wooden keel as skeleton, with paper gypsum board, artificial wooden board, cement fiber panel. Materials can reach sound insulation, insulation, flame retardant, moisture-proof, etc .;
three, plate formula (strip) interior
The indoor partition project made from large block assembled is a lightweight partition installation engineering, and the fast installation of the site can quickly improve production efficiency. Reduce costs, assess the competitiveness of the company, interposed in indoor activities - there is orbit, with keel, fittings, wall panels, filler materials and sewing materials, can reach sound, insulation, flame retardant, moisture-proof The requirements;
4, indoor Glass partitions
material is an aluminum profile frame or stainless steel border, built-in glass brick, glass Board, tempered glass, etc., can achieve elements such as sound, insulation, flame retardant, moisture-proof.
Benefits of indoor partition
Activities can achieve a flexible segmentation of space to create free space. First, the active partition is different from the traditional fixed wall, and its advantage is that the available can be accepted and does not occupy space. When a space is needed, it can be expanded, divided into a space area, and can be collected to the board room area when it is not needed, so that the utilization efficiency of the space is greatly improved.
Modern society is pursuit of efficiency, especially the shortage of space resources, many people want to build a space that can be used, called multi-function space, multi-function space of traditional fixed walls There are already many, but sometimes you need to change space, this time is the time when our event is broken.
is often used in the exhibition, and the different exhibits are often used in the exhibition. Different exhibits are placed in different exhibits. In frequent exhibition activities, there is activity partition. In order to be suitable for different active exhibition areas, there is no need to reduce the time of the exhibition party, thereby improving the efficiency. Since the activity is partitioned, it can make a space, making many places to become multi-functional space.
Because the activity is simple, the product is simple, the style is beautiful, the assembly is flexible, and the fire sound sound is also applicable to the restaurant, hotel, banquet hall, large-scale discharge office, trade negotiation room, exhibition hall, computer room, Hospitals, bars and other places.
In summary is separated by the most economical, fast, reasonable way, fragment different types of space; can provide independent and uninterrupted space; no floor track, ensure the integrity of ground decoration surface sex. In addition, the active partition combination can have a door door to make your space more perfect and flexible.