Introduction
The floor waxing machine is to use an electric motor to rotate through the gear reducer, change the brush disk on the brush head, to complete the wax, light Waiting for functions. According to the form of a single disk, a double disc, a three-disc waxing machine and a wax lightforward. The double-disc waxing machine is small, the use of spirit is suitable for home use. The three-disc waxing machine is attached to a vacuum device. The upper wax light has a wax, a double function, which can be used in large-area ground.
Working principle
has a casing, a handle is provided on the casing, and a motor is provided in the casing, and there is a press outside the casing, the pressing shaft and the motor rotation are used. Eccentric installation, the eccentricity is 7mm, and there is a balance between the motor and the press, the motor is directly connected to the balanced block, and a charging jack is also provided on the outer casing. It is attached to the outside of the handle. The advantages of this utility: the shape structure is in line with ergonomics, the mechanical loss is small; the mechanical loss is small, extended battery working hours; work is stable, low noise, good waxing effect.
includes a chassis and upper housing, a micro-dust tapered, walking drive, walking control device, and a power source are provided on the chassis, wherein the walking drive means comprises a two-step motor and a two-step motor. The mating two-speed mechanism and the two-drive wheel, the rim of the two drive wheel projects out of the bottom of the chassis, and the walking drive means further includes a planar bearing, provided at the bottom of the chassis, and triangular with the two drive wheel; the walking control device Including an ultrasonic ranging apparatus, a single-chip controller, a drive control circuit, and a timer, wherein the probe of the ultrasonic ranging device is disposed at the front position of the chassis, and the single-chip controller is connected to the ultrasonic ranging apparatus, a drive control circuit. The utility model can realize unmanned operation and automatic control.
Construction composition
External
floor waxing machine (17 photos)
The outer casing is ABS engineering plastic, which is more impact and stability than PP. With this material, the adhesion of the paint has increased by 5% to 10%, and the overall surface gloss is increasinginternal
1) motor adopts a cast aluminum architecture once formed, structure Small stable vibration, the noise is significantly reduced, the motor adopts high-strength wear-resistant carbon brush, which increases its wear resistance to 5% to 20%, and since the life of the motor has improved overall life.
2) The size accuracy of the brush shaft is raised from the original IT15 to the current IT10, and it is better to ensure smooth operation of the brush shaft. At the same time, the connection method of the brush shaft is also changed, and the vibration brought by the rotation of the brush shaft is reduced, so that the thus generated by 2.5% to 5.5%.
3) The drive gear is a more abrasion-resistant material-polyol resin. The gear made by such materials is more abrasion and smooth. Due to the change in gear material, the life of the whole machine is increased.
Features
Using electric power to brush the disk to the floor and light all-ground cleaning electrical appliance. Also known as the floor light. The floor waxing machine has been widely used in hotels, families and other places.
The floor waxing machine is simple. It uses an electric motor to rotate the brush head through the gear reducing mechanism, change the brush disk on the brush head to complete different functions. According to the form of structure, it is generally divided into a single disk, a double disc, a three-disc waxing machine, and a wax lighting machine. The double-disc waxing machine is small in size, using a relatively spiritual, suitable for small-scale lighting in the family. The three-disc waxing machine is accompanied by a vacuum cleaner, and the ground dust can be sucking when lighting. The upper wax light has a double function of waxing and lighting. When the wax is waxed, the wax is melted by electric heat and dropped into the ground by a wax bar. The brush rotation is evenly applied to the ground; when lighting, replace the lightning brush, it can perform lightning. The upper wax light is used for large area. The travel drive includes a two-step motor and a two-step mechanism and a two-drive wheel, the two-drive wheel, the two-drive wheel projecting out of the bottom, the walking drive device further includes a planar bearing, provided in the chassis At the bottom, and the two drive wheel is triangular; the walking control device includes an ultrasonic ranging apparatus, a single-chip controller, a drive control circuit, and a timer, wherein the probe of the ultrasonic ranging device is disposed at the front position of the chassis, the microcontroller controller A drive control circuit is driven by the ultrasonic ranging apparatus, respectively. The utility model can realize unmanned operation and automatic control.
Function
Floor waxing machine is a product developed for home maintenance floors, and it can enhance the wax and liquid wax, and the floors are waxed with machine. It is good to absorb, and the land is really saved compared to the use of land. Moreover, it is not more than one and a half to the floating wax, which is usually taken to one hundred meters. It is also a maintenance (the same level of time) It is recommended that you use toothpaste-shaped solid wax. Because the solid wax is longer than the liquid wax, it is effective to extend the wear time, and the other as the door of the bathroom, the kitchen door, the water dispenser, the floor around the fish tank is sealed to prevent water and tide air from sewing the edge of the floor. And the bottom caused by the bottom, filling and deformation. To do a professional thing, use professional machines. Please use waxing machine to care for your home, create a comfortable and beautiful living environment. The products are sold in Bai'an, Oriental Home.
You may think that the composite floor does not need to wax, because selling the floor says this, he wants to say that you should not be caught. Initial time, it is true, but there may be problems after a period of time: For example, the total contact with the water will drum, and the ground is wiped after the wet mop is wiped out the watermark, and there is a small crack caused by long-term dry and humid. Appropriate to wax the composite flooring, which is also a kind of maintenance of it, just like we often give the oil.
Application range
The motor used by the floor waxing machine is mostly single speed, the power is about 200W, and some are above 500W.
The floor waxing machine has developed in a multi-purpose direction, and the new models that have emerged can complete the dust cleaning, combing carpets, wax lighting and other work. Multi-function brush machine hand control design, flexible operation, flush, carpet, waxing, low-speed polishing, etc., can simultaneously meet the four different work needs of customers, brush design is precise, gear transmission, Dual capacitance configuration, safe and reliable, powerful. A vehicle auxiliary equipment, particularly involved in a car polished, waxed vehicle waxing machine. Has a housing, a handle is provided on the casing, and a motor is provided in the casing. It is provided with a plug. The pulling shaft and the motor rotating shaft are eccentric. The eccentric distance is 7mm, the eccentric distance is 7mm, and the eccentric distance is 7mm. Balance block, the motor is directly connected to the balanced block, and a charging jack is also provided on the outer casing, and a soft material is attached externally. The advantages of this utility: the shape structure is in line with ergonomics, the mechanical loss is small; the mechanical loss is small, extended battery working hours; work is stable, low noise, good waxing effect.