Introduction
An innovative pocket-sized FiberOneShot light tester. Greatly simplifies the testing process of traditional single-mode fiber. One-button test function, you can complete the test in just a few seconds. Quickly and accurately verify whether the fiber is in an active state, and measure the distance to a breakpoint, end, dirty end face, or excessive reflection event. The measuring range of the tester is 0 to 9,999 feet (6km), and there is no dead zone. This tester is very suitable for the testing of central stations, nodes, hubs, network segments, and optical network terminals (ONT). For residential or commercial areas, FiberOneShot is a fool-type portable digital display OTDR tester.
Overview
Overview to quickly diagnose basic fiber failures
Flashing icon—to determine whether the fiber is active CheckActive alarm
Event (fault point) distance: dirty end face (connector), fiber break point or strong reflection event
Distance to fiber end: fiber end (length) is sturdy and durable, suitable for outdoor and industrial use The environment is an ultimate product. In addition to the shock-proof shell, an energy-absorbing protective cover is added to withstand drops, shocks, and harsh outdoor and industrial environments. There is also a protective end cap with a strong tether to protect the fiber optic adapter. FiberOneshot is the ideal testing tool for demanding field applications, ensuring trouble-free operation.
Improve productivity through testing
Quickly and accurately measure the distance to breakpoints, ends, dirty end faces/joints or strong reflection events, and the measurement range From 0 to 9,999 feet (Metric display is 0~6,000 meters)
New CheckActive function: When there is optical signal in the tested fiber, it will prompt the user
Turn on at any time: No start/load time required
One-key test: basic fiber test only takes a few seconds
No dead zone: fault location is accurate to 1 meter
Leading features
Display basic optical fiber test results in digital form without explanation
Large liquid crystal display (LCD), adjustable backlight, suitable for any environment
Automatic shutdown function to extend battery life
Battery power indicator
Longer battery life, support 5,000 tests
Replaceable AA batteries (2 pcs)
Quickly replace the battery box without a screwdriver
Removable/easy to clean SC adapter
Self-calibration function, no need Factory calibration
Adjustable inch/metric mode
Adjustable APC/UPC mode
Adjustable refraction (IOR) mode
Available Adjustable dB limit mode
Working wavelength 1310nm±25nm
Rugged and durable, can withstand drops, vibration and shock
Function introduction
Display: Display the optical fiber test results in digital form without explanation
Technical indicators of the FiberOneshot optical fiber tester (typical values)
Working temperature, including battery: 0℃~50℃ Safety: CSAC22.2No.61010.1:04, EN61010-12ndEdition2001, EN60825-1, 2:2006
Non-operating temperature: -20℃~60℃ Altitude: 3000m
Working relative humidity (no condensation): 95% (10℃~35℃) 75% (35℃~40℃) uncontrollable <10℃
EMC: EN61326-1:2004
Vibration: Random, 5Hz~500Hz, MIL-PRF-2880FCLASS2 Sampling distance: 12.5cm~1m (1.25ns~10ns)
Impact: 1 meter drop test instrument report information: Distance to the first excessive reflection event point and/or distance to the end of the fiber Loss, connector loss, bending loss or fiber attenuation) Maximum distance: 6000 meters or 9999 feet
LCD type: backlit black and white screen (segment type) distance accuracy (0m~6000m, or 0ft~9999ft): ±1m, reflective event, ±0.1%, length ±3m, non-reflective Event, ±0.1% length
Refractive index range: 11.45~1.5 (factory default is 1.468) Test speed: <6 seconds, typical value
Automatic shutdown: within 5 minutes If no key is pressed, it will automatically shut down. Connector: detachable/easy to clean SC adapter, UPC grinding
Factory calibration interval: no need to test fiber type: 9/125μm single mode
Output wavelength: 1310nm±25nm reflection Judgment threshold: -40dB typical value, -35, -45dB adjustable
Transmitter type: Fabry-Perot laser diode connected to 9/125μm fiber APC open circuit detection: -65dB reflection (typical value) And higher than the local backscatter >3dB
Laser classification: EN60825-2 standard Class1CDRH detector type: InGaAsPIN photosensitive diode for event monitoring
Pulse width: 20ns~ 500ns safety: CSAC22No.61010.1.04, EN61010-1:2001{second edition}, EN60825-1:2007 Class 1 laser
Input power of the fiber under test:>10mW-pkEMC:EN61326- 1. EN61000-4-2,380MHz~2.7GHz◎3V/m communication terminal requirements: Class B radiation
Dynamic range:>11dB in line with relevant EU directives
to the first Reflective open circuit distance: 1m in line with relevant Australian standards
Photosensitive diode: 40μm-80μm, PINInGaAs is certified by the Canadian Standards Association CSAC22.2No.61010.1.04
Other information
Model
FIBR-1-KIT: FIBERONESHOT-SC-KIT
FIBR-1-SHOT: FIBERONESHOT-ONLY
FIBR- 1-KIT-VF: FIBERONESHOT-SC-KIT+VISLFAULT
FIBR-1-KIT-PM: FIBERONESHOT-SC-KIT+SEPOWERMETER
FIBR-1-KIT-VEPM: FIBERONESHOT-SC-KIT+VISI-FAULT+
SFPOWERMETER
Accessories
FIBR-AC-UAPC: 1-METERUPC-APCLAUNCHCRD
FIBR-AC-UUPC: 1-METRUPC-UPCLAUNCHCRD
FIBR-AC-CH: CASE,HOLSTR-FIBRONESHOT